فشار طراحی طبق استاندارد ASME B16.34 :

• CLASS 150: 19.6 Bar
• CLASS 300: 51.1 Bar
• CLASS 600: 102.1 Bar
• CLASS 900: 153.2 Bar

طراحی این محصولات بر اساس استاندارد :

• API 6D
• API 609
• ASME B16.34
• ASME B16.5
• ASME B16.47
• ISO 5211

دمای طراحی :

• از 196- درجه سانتی گراد تا 420+ درجه سانتی گراد

تست محصولات بر اساس استاندارد :

• API 598
• ISO 5208
• API 6D
• ANSI FCI 70-2 (ANSI B16.104)

• Performance Testing: Performance testing is an important aspect of control valve testing to verify the valve’s ability to perform its intended function. The test is performed to evaluate the valve’s flow characteristics, such as flow rate, pressure drop, and accuracy of control. The results of the performance testing are compared to the valve’s specifications to verify its compliance.

• Functional Testing: The functional testing aspect of ISO 5208 is performed to verify the valve’s proper operation and control. This includes evaluating the valve’s response time, control signal, and shutoff capability. The goal of this test is to ensure that the valve is functioning correctly and providing accurate control of the process.

• High-Pressure Testing: High-pressure testing is performed to verify the valve’s ability to withstand the pressure required for its intended use. The valve is subjected to a specified high pressure and held for a specified time to verify its ability to withstand the pressure without leaking

متریال های مورد استفاده در بدنه و دیسک و شفت محصولات به شرح ذیل می باشد :

• CARBON STEEL: ASTM A105/ A216 WCB / WCC / A515 /A516 / LF2
• STAINLESS STEEL: CF8M / CF8 / 316 / 304 /CF3 / 17-4PH
• SUPER DUPLEX: MONEL K500 / MONEL K400 / F51 / 2507/ INCONEL

متریال های مورد استفاده در آبندی این محصولات به شرح ذیل می باشد :

• برای محصولات SOFT SEAT :

• PCTFE (POLYCHLOROTRIFLUOROETHYLENE)
• PTFE (Poly-tetra-fluoro-ethylene)
• RPTFE (PTFE+25% Carbon)
• DEVLON / GRAPHITE
• PEEK (Poly-ether-ether-ketone)

• برای محصولات METAL TO METAL :

• TUNGSTEN CARBIDE COATING (T.C.C.) (150 ~400 µ THICKNESS)
• COBALT CARBIDE COATING (C.C.C.) (150 ~400 µ THICKNESS)
• STELLITE 6 (3 ~ 6 mm THICKNESS)

محرک های مورد استفاده در محصولات :

• GAS SPRING (SCOTCH YOKE / RACK AND PINION) ACTUATOR: اکچوئتور پنوماتیکی
• MOV (MOTORIZED): اکچوئتور برقی